Powersoft X4 DSP +Dante

PURCHASE ONLY WITH SOLTON PRODUCTS

Overview
Powersoft X4 innovates and evolves the concept of the amplification platform through the integration of a worldwide compatible three-phase power supply and a fully-featured DSP.

The complete digital audio signal management system based on ARM Cortex A-8 processor and TI C6000 DSP platform heralds new and innovative level of signal processing, providing routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay up to 2s in input processing and 100ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters, and Active DampingControl™.

The power supply permits worldwide AC acceptance and direct connection to any regional power line configuration: it is suitable for Single Phase, Bi-Phase, or Three Phase operation from 85 VAC up to 440 VAC without the need for manual selection. True Three Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system design.

MyPowersoft services are available for this product

Features
Specifications
General
Output power per channel
Output power per channel 5200 W @ 2 Ω 3000 W @ 4 Ω 1600 W @ 8 Ω
Bridge mode 10400 W @ 4 Ω 6000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω 175 Vpeak
Current 130 Apeak
AC main power
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V – 264 V
Power consumption
Idle <100 W
Max <3000 W
Operating temperature range 0° – 35° C – 32° – 95° F
Thermal dissipation*
1/8 of max output power @ 8 Ω 115 V: 1127BTU/h 230 V: 1058BTU/h
1/4 of max output power @ 8 Ω 115 V: 2124BTU/h 230 V: 1639BTU/h