DAP Pure Club 12 Active speaker set

12" sub with built-in amplifier & dynamics

2x 6" satellites with 1" Neodymium compression driver

Full-range Hi-Fi sound quality

Adjustable subwoofer level

Phase invert switch

The DAP Pure Club 12 is an active Hi-Fi speaker set with built-in amplifiers and dynamics. It consists of a 12" sub and two 6" tops with scratch resistant paint and stylish metal grills to survive the rigours of frequent touring. The PURE speakers are safe to be used by everyone since the built-in dynamics will prevent the speakers from overloading and will give an excellent frequency response at any sound level. You can even adjust the subwoofer level for adding or removing the punchy bass sound of the sub.

The Pure Club 12 is suitable for parties at home, in small venues or for performing on small gatherings, such as exhibitions and flea markets. Accessories are optional and will complete your plug & play set-up, such as cables, tripods, transport covers and caster boards.

Outputs

RMS Output Power Amplifier 590 W

Peak Output Power Amplifier 1180 W

Top Cabinet High Driver Power 120 W

Top Cabinet Low Driver Power 120 W

Subwoofer Power 350 W

Passive High Output Connector Speaker Connector 4 pole

Main Outputs 2

Main Output Connector 3-pin XLR

Inputs

Mono Inputs 2

Mono Input Connector 3-pin XLR, RCA, TRS balanced 6.3 mm

Mono Input Impedance 20000 Ω

Audio Specifications

THD Level < 0.5 %

Signal-to-noise Ratio > 100 dB

SLEW Rate 20 V/μs

Amp Technology Class AB

Damping Factor 100 :1

Top Cabinet Impedance 8 Ω

Subwoofer Impedance 8 Ω

Speaker System Active Sub-Top Set

Speaker Sensitivity (1 W/1 m) 95 dB

Subwoofer Sensitivity (1 W/1 m) 100 dB

Max. SPL subwoofer at 1 m 125.4 dB

Max. SPL top cabinet at 1 m 115.8 dB

Frequency Response Minimum 45 Hz

Frequency Response Maximum 20000 Hz

Crossover Frequency Low 125 Hz

Crossover Frequency High 2700 Hz

Woofer Diameter 12 "

Woofer Voice Coil 2 "

Woofer Magnet Type Ferrite

Satellite Woofer 6.5

Satellite Woofer Voice Coil 1.5

Satellite Woofer Magnet Type Ferrite

Compression Driver Diameter 1 "

Compression Driver Voice Coil 1 "

Compression Driver Magnet Type Neodymium

Subwoofer Dispersion Angle Horizontal 360°

Subwoofer Dispersion Angle Vertical 180°

Satellite Dispersion Angle Horizontal 90°

Satellite Dispersion Angle Vertical 60°

Sound Editing

Crossover Filter Types Butterworth

Crossover Slopes 24 dB

Phase Reverse Yes

Electrical Specifications and Connections

Power Supply 100-240 VAC 50-60 Hz

Power Consumption 1000 W

Fuse 5 A

Power Connector in Power Pro Blue

Power Connector out Power Pro Grey

Mechanical Specifications

Amplifier Airflow Back to front

Amplifier Cooling Axial fan

Height Top Cabinet 388 mm

Width Top Cabinet 245 mm

Length Top Cabinet 240 mm

Height Subwoofer 507 mm

Width Subwoofer 450 mm

Length Subwoofer 595 mm

Material Wood

Material Thickness 12 mm

Weight Top Cabinet 6.24 kg

Weight Subwoofer 27.42 kg

IP Rating IP20 (indoor use only)

Colour Black

Product Properties

Pole Mount 35 mm

Electronic Protection Clip limiter (fixed), Convection-fan, DC voltage, Softstart, Thermal

LED Indicators Power, Protect

Rotatable Horn No

Useable as Monitor/Wedge No

Speaker Grill Material Steel

Speaker Handles Positions Left side, Right side, Top

Castors None

Included Items

Included Cables powerCON cable

Included Accessories User Manual