4000 W / 141 dB SPL @ 1 m
2x 18" Celestion Ferrite Magnet subwoofer with 5" voice coil
Class-D Amplifier
Configurable DSP-optimised amplification
Multi Voltage Power supply with active PFC
The DAP Odin S-218A is an extra bold, heavy weight Ultra Subwoofer suitable for medium to big crowds. It produces an awesome wall of sound with a frequency response as low as 28 Hz for an extremely low bass. The internal high-power 4 KW Class D amplifier has a peak output power of 10,000 watts. The subwoofer is intended to be used in combination with T-8A Line Array Satellites for a super punchy full-range sound.
The Odin S-218A is equipped with two 18" Celestion Ferrite Magnet subwoofers containing 5" voice coils producing up to a staggering 141 dB SPL @ 1 meter distance. The DSP settings are configurable to make sure that the S-218A delivers under any circumstance and in any setup.
Several DSP presets are available, including preset for “Cardioid” and “End Fire” mode. A great addition to the T-8A Satellite and S-18A Subwoofer to literally bring more punch and depth to your live shows.
Free Odin Editor software, in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and "Throw". A plug-in has been developed for adding our speakers to its database.
Please note that powerCON and network cables are not included but are to be ordered separately.
Outputs
Low Driver Power 1600 W
RMS Output Power Amplifier 4000 W
Peak Output Power Amplifier 10000 W
Main Outputs 1
Main Output Connector 3-pin XLR
Inputs
Mono Inputs 1
Mono Input Connector 3-pin XLR
Audio Specifications
THD Level < 0.5 %
Signal-to-noise Ratio > 90 dB
AD/DA Convertor Sample Rate 48 kHz
Amp Technology Class D
Damping Factor 200 :1
Speaker System Subwoofer
Speaker Sensitivity (1 W/1 m) 101 dB
Speaker Impedance 8 Ω
Maximum SPL at 1 m 141 dB
DSP Processor Bitrate 32-bit
Frequency Response Minimum 28 Hz
Frequency Response Maximum 110 Hz
Frequency Response (-6dB) Minimum 28 Hz
Frequency Response (-6dB) Maximum 110 Hz
Crossover Frequency Low 25 Hz
Crossover Frequency High 90 Hz
Woofer Diameter 18 "
Woofer Voice Coil 5 "
Woofer Magnet Type Ferrite
Subwoofer Dispersion Angle Horizontal 360°
Subwoofer Dispersion Angle Vertical 180°
Sound Editing
Equalizer Range 30 dB
Parametric Output Equalizer 8 Bands
Crossover Filter Types Butterworth
Crossover Slopes 24 dB
Phase Reverse Yes
Internal Storage
User Presets Yes
User Presets Capacity 10
Control and Programming
Control Mode PC Software, Stand Alone
Electrical Specifications and Connections
Power Supply 100-240 VAC 50-60 Hz
Power Consumption 3100 W
Fuse 6.3 A
Power Connector in powerCON Blue
Power Connector out powerCON Grey
Data Connector in etherCON
Data Connector out etherCON
Mechanical Specifications
Amplifier Cooling Axial fan
Height (mm) 665 mm
Width (mm) 1400 mm
Length (mm) 635 mm
Material Wood
Material Thickness 18 mm
Colour Black
Finish Painted
Weight 115.5 kg
IP Rating IP20 (indoor use only)
Product Properties
Pole Mount M20
Electronic Protection Convection-fan, Digital limiter, Overload, Thermal
LED Indicators Clip, Data connect, Power, Protect, Signal
Speaker Grill Material Steel
Speaker Handles Positions Left side, Right side
Castors Optional
Rigging
Rigging Options Stacking
Included Items
Included Cables None
Included Accessories User Manual
Included Rigging None
Οι τιμές ΔΕΝ συμπεριλαμβάνουν ΦΠΑ 24%