The cost-effective RS Series amplifiers are designed for professionals who demand quality, reliability and value.
RS amplifiers represent the best compromise between economy and performances, taking advantage of latest improvements in electronic assembly.RS4-4000 | |||
| Output power | |||
| @ 2 Ohms | 4 x 1000 W | ||
| @ 4 Ohms | 4 x 1000 W | ||
| @ 8 Ohms | 4 x 630 W | ||
| Bridge @ 4 Ohms | 2 x 2000 W | ||
| Bridge @ 8 Ohms | 2 x 2000 W | ||
| Frequency Response | |||
| Power Bandwidth ± 0.25dB | 20 Hz – 20 KHz | ||
| Phase Response | |||
| @ 1 W 20Hz-20KHz | ±15 deg | ||
| Total Harmonic Distortion | |||
| 20Hz-20KHz | <0.05% | ||
| Intermodulation Distortion | |||
| SMPTE | <0.05% | ||
| Damping Factor | |||
| 20-500Hz @ 8 Ohms | >500 | ||
| Crosstalk | |||
| 20Hz-1KHz | >75 dB | ||
| Voltage Gain | |||
| 32 dB | |||
| Sensitivity | |||
| Rated Power (26/32/38dB Gain) | 1.8 V | ||
| Signal to Noise Ratio | |||
| 20Hz-20KHz | 104dBA | ||
| Required AC Mains | |||
| Operating Voltage (50Hz-60Hz) | 170V -265V AC | ||
| Power on Idling (@230V) | 0.5 A | ||
| 1/8 Rated Power (@4 Ohm) | 10 A | ||
| Dimmensions | |||
| W x H x D (mm) | 483 x 88.9 x 254 | ||
| W x H x D (inches) | 19 x 3.5 x 10 | ||
| Weight | |||
| Net | 6 Kg / 13 lbs | ||
| Protections | |||
| Soft-start, Turn-on Turn-off transients, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, ICL™, PMS™ and SSP™ | |||
Manufacturer:
Lynx Pro Audio
Οι τιμές ΔΕΝ συμπεριλαμβάνουν ΦΠΑ 24%
