Perfect sound quality and long lifespan
Robust steel 19" / 1U housing
Suitable for either mobile and installation speakers
Bridge and stereo modus
SMPS, Class D amplification & Soft Start technology
The DAP Qi-4200 is a 4x 200 watt amplifier suitable for the DAP-Xi speaker series. Each channel has its own gain control and protect, limit and signal indicator LEDs. This amplifier is not only suitable for DAP Xi speakers but can also be applied for mobile use due to its rugged steel housing.
The Qi-4200 has 4 routable XLR inputs and speakON outputs. They can be set in either bridge and stereo mode. Equipped with SMPS and Class D amplification, it is a lightweight and energy efficient solution delivering a high quality sound signal.
This device is save to use thanks to its advanced protection circuit. It is protected from overload, overheat and clipping due to various built-in protection mechanisms, such as a softstart and clip limiter. Furthermore, the Qi-series is made with high-quality low-deviation components to ensure a long lifespan and a perfect sound quality.
Outputs
2 Ohms Stable No
Output per channel into 8 ohms at 1 kHz 120 W
Output per channel into 4 ohm at 1 kHz 200 W
Bridge Output into 8 ohms at 1 kHz 400 W
Output per channel into 8 ohm at 20 Hz > 20 kHz 120 W
Output per channel into 4 ohm at 20 Hz > 20 kHz 200 W
Bridge Output 8 ohm on 20 Hz > 20 kHz 400 W
Output Channels 4
Output Mode 4-channel, Bridge, Stereo
Output Connector Speaker Connector 4 pole
Inputs
Mono Inputs 4
Mono Input Connector 3-pin XLR
Mono Balanced Input Maximum Level 20 dBu
Mono Input Impedance 20 Ω
Mono Unbalanced Input Sensitivity 1 dBv
Audio Specifications
THD Level < 0.5 %
Signal-to-noise Ratio > 90 dB
SLEW Rate 15 V/μs
Amp Technology Class D
Damping Factor 200 :1
Frequency Response Minimum 10 Hz
Frequency Response Maximum 20 Hz
Electrical Specifications and Connections
Power Supply 100-240 VAC 50-60 Hz
SMPS Included Yes
Power Consumption 725 W
Fuse 5 A
Power Connector in IEC
Mechanical Specifications
Amplifier Airflow Front to back
Amplifier Cooling Axial fan
Height (mm) 44 mm
Width (mm) 483 mm
Length (mm) 390 mm
Installation Depth (excl. connector) 390 mm
Flightcase Size 19"
Rack Units 1 U
Housing Metal
Colour Black
Finish Powder Coating
Weight 6.4 kg
IP Rating IP20 (indoor use only)
Product Properties
Electronic Protection Clip limiter (fixed), DC voltage, RF, Short circuit, Softstart, Thermal
LED Indicators Clip, Power, Protect, Signal
Included Items
Included Cables IEC cable
Included Accessories Rubber feet, User Manual