Channel displays that show the input source
2 built-in USB-Audio interfaces
VCA controlLED faders
Reverb & talk-over on microphone channels
Individual in- and output VU’s
The DAP IMIX-7.2 USB is a unique installation mixer. It’s a 6U, 7 Channel, 2 Zone mixer with 2 built-in USB-Audio interfaces especially designed to fulfill all audio needs of a pub, school, small disco without scarifying on the ease of use. It is the world first installation mixer that shows the active channel source on a display. This will help users to select the desired source for the desired area. Each in- and output has own individual VU metres which gives you total level information in one view. The channel gain must be set at the back to prevent wrong use by non-technical users. The displays are pre-programmed with 16 different source names which can be set at the backside by an installer. It has 2 microphone inputs with an easy-to-use reverb effect and talk-over function. At the front it has direct inputs for a microphone, a line input and a dedicated phone/mp3 input. With a pair of headphones you can monitor all out- and inputs.
Inputs
Mono Inputs 2
Mono Input Connector 3-pin XLR, TRS balanced 6.3 mm
Stereo Inputs 7
Stereo Input Connector RCA
Auxiliary Inputs 1
Auxiliary Input Connector RCA, TRS balanced 3.5 mm
Outputs
Main Outputs 2
Main Output Connector 3-pin XLR, RCA
Zone Output 2
Zone Output Connector 3-pin XLR, RCA
Monitor Output 1
Monitor Output Connector RCA
Headphone Output 1
Headphone Output Connector TS balanced 6.3 mm
Record Output 1
Record Output Connector RCA
Digital Playback
USB Input Audio Interface 2
Input Connection Audio Interface USB-B
USB Type Audio Interface 2.0
Sample Rate Audio Interface 48 kHz
Supported Audio Interface Input Channels 4
Audio Specifications
THD Level < 0.05 %
Signal-to-noise Ratio > 100 dB
Signal-to-noise Ratio Mic > 100 dB
Signal-to-noise Ratio Line > 100 dB
AD/DA Convertor Sample Rate 48 kHz
Frequency Response Minimum 20 Hz
Frequency Response Maximum 20000 Hz
Phantom Power No
Sound Editing
Parametric Channel Equalizer 3 Bands
Input Channel Equalizer Range 12 dB
Channel Input Fixed Frequencies 80, 1.000, 12.000 Hz Hz
Microphone Input Equalizer Range 12 dB
Parametric Microphone Equalizer 3 Bands
Microphone Input Fixed Frequencies 120, 800, 5.000 Hz Hz
Built-in FX Yes
FX Types Reverb
Software Specifications
Supported Operating Systems Mac, Windows
Control and Programming
Display 7-segment
Product Properties
LED Indicators Channel select, Clip, Output level, Signal
Electrical Specifications and Connections
Power Supply 100-240 VAC 50-60 Hz
Power Consumption 33 W
Fuse 1 A
Power Connector in IEC
Data Connector in USB
Mechanical Specifications
Fader Length 100 mm
Height (mm) 266 mm
Width (mm) 135 mm
Length (mm) 481 mm
Flightcase Size 19"
Rack Units 6 U
Housing Metal
Colour Black
Weight 6.4 kg
IP Rating IP20 (indoor use only)
Included Items
Included Cables IEC cable, USB-A - USB-B cable
Οι τιμές ΔΕΝ συμπεριλαμβάνουν ΦΠΑ 24%